| Pioneering - Nets |
|
A net type construction can be very useful in many different
situations. Perhaps the most obvious use is as a 'fishing
net' but it can also be used for hammocks, simple 'carry-all'
and for storage space (Suspend your food above the ground
within the net at camp).
There are two main ways of making a net. One is to tie the
knots by hand and the other is to 'knit' it. The latter needs
practice whilst the former can be very time-consuming. The
best type of 'rope' to use for nets is a type of thick twine
or parcel string. Parachute cord is ideal but not exactly
available in the shops. Experiment to see which lines work
and which dont.
|
|
| Quick Links |
|
|
|
| |
|
| Downloads |
Darren Dowling
|
|
|
| |
|
| Connected |
|
| For those interested in pioneering projects
the Hurricane
District site is a 'must see' website. Packed full of
diagrams and ideas for those pioneering projects along with
photos of constructed items there is something there for every
scout troop.
Peter Le Roux's
pioneering blog is also worth checking out, as is pioneering
made easy
|
|
| Knot your Net |
Darren Dowling
|

Knot Net
It is much easier to use this technique if you have two 'uprights'
to suspend a rope between. Decide how wide you want your net
to be and set the two uprights that distance apart. Tie a
length of twine between the two (this should be thicker than
the twine you will use for the strands). You will now need
to cut many lengths of rope. The length will determine the
depth of the net (as a guide this will be around 3/8 of the
total length of your twine). It may also be an idea to have
something to use as a 'ruler' to keep the net spacings equal.
Depending upon the intended use of the net, the spacing will
be somewhere between 2-5 cm.
Take the lengths of twine you have cut and 'double' them
(fold them in half). Now take the bight (loop) and make a
prusik knot over the length of twine you strung between the
uprights. Do this all the way along the length of the twine
making sure to space them evenly with your ruler.
You will now have many lengths of twine hanging down. Starting
at the left hand side we will ignore the very first strand
(of the pair as each set hanging down has two strands), this
will form the end of the net. Take the second of the pair
and hold it together with the first strand of the next pair
(it all becomes obvious if you look at the diagram!). Tie
these together with an overhand knot. Repeat this process
with the next two strands along until you reach the end of
the net. Remember to space them evenly with your ruler
Now move down a 'row' and repeat. The only difference here
is that you will use the very end strands (to form a diamond
like pattern). For the next row down you ignore the first
and last strand. The next you include them and so on.
When you reach the bottom of the net, you will need to put
another length of twine across between the uprights (like
the one the strands are hanging from). It would be sensible
if this was a thicker strand as it has to bear most of the
strain. Now tie the strands hanging down, in pairs, to the
bottom line of the net so that they are secure.
You now have a net ready for use. It may help to secure the
four corners of the net (where the strands tie to the two
lengths) to make sure the net will not slip up and down the
lengths. I also find it useful if the lengths have a fair
amount 'left over' so that you can tie the net to other things
(e.g. use as a hammock).
Back to Top
|
|
| Knit your Net |
Darren Dowling
|
|
[Content to be filled]
Back to Top
|
|
| Hammocks |
Darren Dowling
|

Hammock
To make a hammock simply construct a net (using your preferred
method) which is at least 75 cm across and most certainly
wider than your height! As it will have to take your weight
make sure you use strong twine or even rope for the top and
bottom lengths (ones between uprights). If you cannot do this
use a doubled length of your twine instead. You need to leave
a long end so that you can secure the hammock between two
suitable points.
To prevent the hammock 'twisting over' you will find it useful
to use a spacer bar at each end. Simple put a notch in the
end of a suitable 'bar' and slip the twine ends into the notches.
You may want to tie the two ends lengths together to form
a closed loop (e.g. a bowline) to make it easy to slip the
hammock over a protusion.
Note that it takes practice to slip in a hammock, it is not
as easy as it looks!
Back to Top
|
|